GRADATEURS PULSAR 6 X 10AMP + ACCESSOIRES

Nous vendons un Rack de 3 Gradateurs (bloc de puissance) Pulsar rackPak 6 x 10AMP phase status dimming + 6 Boîtes de pont Socapex et câbles.

+ DE PHOTOS et D'INFO SUR DEMANDE.

Le lot comprend :
- 2 Pulsar 4 Unit Rackpak - 6 x 10A Rackpak Status Dimming
- 1 Pulsar 2 Unit Rackpak - 6 x 10A Rackpak Status Dimming
- 1 Lot de 6 boîtes de pont OXO BP6S : SOCAPEX / 6 PC16A
- 1 Boîte de répartition pour mes câbles SOCAPEX
- 3 câbles TITANEX H07 RN-F 3G2.5 avec fiche femelle 2P+T 16A de 1m
- 7 câbles TITANEX H07 RN-F 3G2.5 avec fiche femelle 2P+T 16A de 1m15
- 2 câbles TITANEX H07 RN-F 3G2.5 avec fiche femelle 2P+T 16A de 1m60
- 6 câbles TITANEX H07 RN-F 3G2.5 de 2m60
- 1 câbles TITANEX H07 RN-F 18G2.5 avec 6 fiches femelles 2P+T 16A de 17m70
- 1 câbles FLEXTREME H07 RN-F 18G2.5 avec 6 fiches femelles 2P+T 16A de 7m
- 6 câbles LINEAX H07 RN-F 18G1.5 avec SOCAPEX (1x17.5m, 3x10m, 1x5.3m et 1x4.6m)
(tailles des câble approximative, il sont un peu plus long)

Caractéristiques standard du Pulsar rackPak :
- 0-10V control input by locking 8-pin DIN socket
- 100-230V AC, 50-60Hz, auto-sensing
- Suitable for resistive and/or inductive loads with no minimum load requirement
- Outputs protected by fuses or double pole circuit breakers depending on the model
- Low voltage power supply to feed control desks
- Electronics On/Off switch with built in indicator neon controlling the power to the electronics
- Channel fuse blown neon indicators
- Dimming versions feature lamp Preheat switch to extend lamp life
- Input smoothing

2 Pulsar 4 Unit Rackpak - 6 x 10A Rackpak Status Dimming
Status features : 6 x level control pots, 6 x output neons
Mains supply : 100-240V AC, 50-60Hz @ 60A (full load) 1-3 phase
Load outputs : 6 x 10A Inductive and/or Resistive
Control channels : 6 x 0-10V analogue via 8-pin DIN socket
Output connectors : 12 x French sockets, 2 per channel

1 Pulsar 2 Unit Rackpak - 6 x 10A Rackpak Status Dimming
Status features : 6 x level control pots, 6 x output neons
Mains supply : 100-240V AC, 50-60Hz @ 60A (full load) 1-3 phase
Control channels : 6 x 0-10V analogue via 8-pin DIN socket

Breaker Rackpaks
The Breaker Rackpaks feature the latest double pole thermal magnetic circuit breakers, which offer thermal trip protection against long-term overload and magnetic trip for instant disconnection of fault currents. The double pole circuit breakers provide total circuit isolation, for optimum safety with each circuit breaker fully isolating both poles of each circuit. The breakers also allow channels to be independently turned off for maintenance operations etc.

Prix: 1000€